Single Channel Model SCM10 from Specialise Instruments Marketing Company

Single Channel Model SCM10

The SCM10, single channel temperature monitor, is a compact, reliable instrument capable of providing extremely accurate measurements for a variety of applications. The unit supports diode and RTD sensors and it can be configured for the appropriate sensor type using the front panel or the utility software. Two convenient sensor excitation currents are provided to choose from. The SCM10 provides a 4 –leaded differential measurement for accurate temperature measurements. Measurements are available in temperature units K, ̊C or ̊F , or sensor units V or Ω. The SCM10 has 9 standard sensor curves that are programmed into the instrument from the factory. It also provides room for one 200 point user curve, which may be loaded into the instrument using the utility software. With a serial, Ethernet, and convenient graphical user interface, as well as an ASCII command set and LabVIEW™ drivers, the SCM10 can be used as a stand-alone temperature monitor or can be easily integrated into other systems.

Product Specifications :

Additional information

Weight	4 lbs
Dimensions	15 × 10 × 8 in
Thermometry Number of Inputs	1
Measurement Type	4‐lead single polarity
Excitation	Constant current, 10μA or 1mA (0.01%) A/D Resolution: 24 bit
Input Accuracy	Sensor Dependent
Max Measurement Rate	5 rdg/s
Supported Sensors	Silicon diodes RTD’s Gallium Arsenide (25K & above) Ru0 1KΩ, Ru0 100KΩ, Pt 100Ω, Pt 1000Ω Cernox Carbon-Glass (4K & above)
Standard Curves	Si410, Si430, Si435, DT470, DT670, CTI, PT100, PT1000, RO600, RO105
User Curve	One 200‐point user curve in non‐volatile memory
Input Connector	DB15
Front Panel Display Type	6 digit LED
Front Panel Display Units	K, °C, °F, V, Ω
Front Panel Display Update Rate	2 rdg/s
Front Panel Temperature Display Resolution	0.001° between 0‐99.999°, 0.01° between 100‐999.99°, 0.1° above 1000°
Front Panel Sensor Units Display Resolution	100uV (for diode type), Sensor Dependent (for RTD type)
Front Panel Keys	Menu, ˆ (Up Arrow), ˇ (Down Arrow), Enter
Front Panel Features	View & Edit Configuration Settings, Instrument Reset
Serial Interface Format	RS‐232C
Serial Interface Baud Rates	9600, 19600, 57600, 115200
Serial Interface Functionality	Graphical User Interface, LabView Drivers (Version 8.0 and above)
Serial Interface Connector	DB9
Ethernet Interface Format	10‐BaseT
Ethernet Interface Speed	10 Mbps
Ethernet Interface Functionality	Graphical User Interface, LabView Drivers , Web Based Monitoring Utility
Ethernet Interface Connector	RJ‐45
Alarm Number	2, High and Low
Alarm Settings	High Setpoint, Low Setpoint, Dead band, Latching or Non‐latching, Alarm On/Off
Alarm Actuators	Front Panel LEDs, relays
Number of Relays	2
Contacts	Normally Open (NO), Normally Closed (NC), and Common (C)
Relay Contact Rating	24 VDC at 1 A
Relay Settings	Manually off, manually on, follows alarms
Connector	DB15
Analog Output Isolation	Output is not isolated from chassis ground
Analog Output Update Rate	2rdg/s
Voltage/Current Output	RANGE:0‐10V, 4‐20mA RESOLUTION:0.16 mV0.3 μA ACCURACY:±1.25 mV±2.5 μA MIN. LOAD RESISTANCE500 Ω (short‐circuit protected) N/A COMPLIANCE VOLTAGEN/A10 V LOAD REGULATION:N/A10 V
Settings	Scale voltage or current with temperature, native sensor units, or natural logarithm of sensor units
Power Requirement	Regulated 9‐24 VDC at 500 mA, Barrel Plug 5.5 mm OD x 2.5 mm ID x 9.9 mm L, Center Positive
Size	1/8 DIN
Supported OS	Windows 7.0, XP & Vista (32 bit)
Mounting	Panel mount into 91 mm W x 44 mm H (3.6 x 1.7 in) cutout
Weight	0.45 kg (1 lb)
Approval	CE mark, RoHS compliant